LevelOne GTL-2690 - Manual (Page 72)

Configuring the Switch
3-8
3
LLDP Link Layer Discovery Protocol 12-1
Configuration Configures global LLDP timing parameters 12-1
Port Configuration Configures parameters for individual ports 12-3
Trunk Configuration Configures parameters for trunks 12-3
Local Information Displays LLDP information about the local device 12-5
Remote Port Information Displays LLDP information about a remote device connected to
a port on this switch
12-8
Remote Trunk Information Displays LLDP information about a remote device connected to
a trunk on this switch
12-8
Remote Information Details Displays detailed LLDP information about a remote device
connected to this switch
12-9
Device Statistics Displays LLDP statistics for all connected remote devices 12-11
Device Statistics Details Displays LLDP statistics for remote devices on a selected port or
trunk
12-13
Priority 13-1
Default Port Priority Sets the default priority for each port 13-1
Default Trunk Priority Sets the default priority for each trunk 13-1
Traffic Classes Maps IEEE 802.1p priority tags to output queues 13-3
Traffic Classes Status Enables/disables traffic class priorities (not implemented) NA
Queue Mode Sets queue mode to strict priority or Weighted Round-Robin 13-5
Queue Scheduling Configures Weighted Round Robin queueing 13-6
IP Precedence/
DSCP Priority Status
Globally selects IP Precedence or DSCP Priority, or disables
both.
13-7
IP Precedence Priority Sets IP Type of Service priority, mapping the precedence tag to
a class-of-service value
13-8
IP DSCP Priority Sets IP Differentiated Services Code Point priority, mapping a
DSCP tag to a class-of-service value
13-10
IP Port Priority Status Globally enables or disables IP Port Priority 13-11
IP Port Priority Sets TCP/UDP port priority, defining the socket number and
associated class-of-service value
13-8
QoS Quality of Service 14-1
DiffServ Configure QoS classification criteria and service policies 14-1
Class Map Creates a class map for a type of traffic 14-2
Policy Map Creates a policy map for multiple interfaces 14-4
Service Policy Applies a policy map defined to an ingress port 14-7
Table 3-2 Switch Main Menu (Continued)
Menu Description Page