LevelOne GTL-2690 - Manual (Page 758)

Open Shortest Path First (OSPF)
42-45
42
The following shows output when using the external keyword.
Console#show ip ospf database external
OSPF Router with id(192.168.5.1) (Autonomous system 5)
Displaying AS External Link States
LS age: 433
Options: (No TOS-capability)
LS Type: AS External Link
Link State ID: 10.1.1.253 (External Network Number)
Advertising Router: 10.1.2.254
LS Sequence Number: 80000002
LS Checksum: 0x51E2
Length: 32
Network Mask: 255.255.0.0
Metric Type: 2 (Larger than any link state path)
Metric: 1
Forward Address: 0.0.0.0
External Route Tag: 0
Console#
Table 42-14 show ip ospf external - display description
Field Description
OSPF Router id Router ID
LS age Age of LSA (in seconds)
Options Optional capabilities associated with the LSA
LS Type AS External Links - LSA describes routes to destinations outside the AS (including
default external routes for the AS)
Link State ID IP network number (External Network Number)
Advertising Router Advertising router ID
LS Sequence Number Sequence number of LSA (used to detect older duplicate LSAs)
LS Checksum Checksum of the complete contents of the LSA
Length The length of the LSA in bytes
Network Mask Address mask for the network
Metric Type Type 1 or Type 2 external metric (see “redistribute” on page 42-25)
Metrics Cost of the link
Forward Address Forwarding address for data to be passed to the advertised destination
(If set to 0.0.0.0, data is forwarded to the originator of the advertisement)
External Route Tag 32-bit field attached to each external route
(Not used by OSPF; may be used to communicate other information between
boundary routers as defined by specific applications)