LevelOne GTL-2690 - Manual (Page 68)

Configuring the Switch
3-4
3
Main Menu
Using the onboard web agent, you can define system parameters, manage and
control the switch, and all its ports, or monitor network conditions. The following
table briefly describes the selections available from this program.
Table 3-2 Switch Main Menu
Menu Description Page
System 4-1
System Information Provides basic system description, including contact information 4-1
Switch Information Shows the number of ports, hardware/firmware version
numbers, and power status
4-3
Bridge Extension Shows the bridge extension parameters 4-4
IP Configuration Sets the IPv4 address for management access 4-5
IPv6 Configuration Configures IPv6 interface addresses and static neighbors 4-9
IPv6 Configuration Configures IPv6 interface address and protocol settings 4-9
IPv6 General Prefix Configures IPv6 general prefix for network portion of addresses 4-15
IPv6 ND Neighbor Configures IPv6 neighbor discover protocol and static neighbors 4-17
Jumbo Frames Enables support for jumbo frames 4-21
File Management 4-21
Copy Operation Allows the transfer and copying files 4-22
Delete Allows deletion of files from the flash memory 4-22
Set Startup Sets the startup file 4-22
Line 4-26
Console Sets console port connection parameters 4-26
Telnet Sets Telnet connection parameters 4-28
Log 4-30
Logs Sends error messages to a logging process 4-33
System Logs Stores and displays error messages 4-30
Remote Logs Configures the logging of messages to a remote logging process 4-31
SMTP Sends an SMTP client message to a participating server 4-33
Renumbering Renumbers the units in the stack 4-35
Reset Restarts the switch 4-36