Teledyne LeCroy SierraFC M164 User Manual - Manual (Page 152)

Teledyne LeCroy Easy Mode (Pre‐Defined Setups)
152 SierraFC M164 Protocol Analyzer User Manual
Pattern/Event/Infusion Trigger Mode
In Pattern/Event Trigger mode, the Analyzer triggers whenever any of the patterns selected for trig‐
gering occurs (an OR condition). In Pattern/Event/InFusion mode, the analyzer can be triggered by an
InFusion event that has the Analyzer Trigger action (see Analyzer Trigger in
Table 4.4 on page 281 ).
The procedure for selecting trigger parameters is identical to that for selecting capture parameters.
All items selected for triggering appear in the Project Overview pane.
To define patterns for triggering, check the Pattern button in the Trigger dialog.
Figure 2.117: Select Patterns for Trigger
The Patterns Library window displays the following trigger pattern categories (for details
on each of the trigger pattern refer to
“Defining Patterns” on page 47 ):
 Timers/External
 Timer
 Timeout
 External Trigger