Teledyne LeCroy SierraFC M164 User Manual - Manual (Page 19)

SierraFC M164 Protocol Analyzer User Manual 19
Expandability Teledyne LeCroy
1. Unplug the system from AC power and turn the system so the expansion port is
facing you. Note the two retaining screws and the holes for the extraction tool that
are located on the panel of the expansion card.
Note: The SierraFC M164 Protocol Analyzer does not support the power expansion card. The method
of inserting other expansion cards is the same.
2. Insert the extraction‐tool prongs into the holes in the expansion card panel.
Note: If the prongs do not slip easily into the holes, use a small nail file or similar device to remove
paint from the prongs
3. Rotate the extraction tool to a horizontal position to lock the prongs into place and
make a handle
Holes in the
Expansion Card