Teledyne LeCroy SierraFC M164 User Manual - Manual (Page 221)

SierraFC M164 Protocol Analyzer User Manual 221
Statistical Report Teledyne LeCroy
AL Commands
To display the AL Commands Report, click the AL Commands tab. The following
information is displayed in this report:
 Port: All, Custom and ports that are selected
 Source ID:
 Destination ID:
 Type: All, Custom and other
 Duration: All, Custom and other
 Count
 %
Figure 3.43: AL Commands Report
Exchange Performance Report
To display the Exchange Performance Report (see Figure 3.44 on page 222 ), click the
Exchange Performance tab. The following information is displayed in this report:
 Port: All, Custom and ports that are selected
 Source ID
 Destination ID
 R/W Type
 Min Response
 Max Response
 Average Response
 Min Efficiency
 Max Efficiency
 Average Efficiency
 Total Command
 Total Byte: Represents count of data payloads. Removed idles and truncated pay‐
load frames do not affect the total byte value.
 Total Duration: All, Custom and other
 Min RW/Sec
 Max RW/Sec