Teledyne LeCroy SierraFC M164 User Manual - Manual (Page 226)

Teledyne LeCroy Tools
226 SierraFC M164 Protocol Analyzer User Manual
Figure 3.47: Tools - Self Test Dialog
Self Test Tabs
You can Self Test with the options available in the Self Test Dialog.
Choose the function to test and click the Start ... Check button. After a short time, the
Test Result appears to the right of the selected line.
Test Result Column
If a test is OK and you specified one run, the Test Result column on the right displays OK:
1 times (see the screen capture above).
If a test has an error and you specified one run, the Test Result column on the right
displays Error: 1 times (see the screen capture above).
Saving
You can save any check result by checking the Save error details check box and specifying
a destination file name.
Number of Runs Each Test
You can specify to run a test more than once.