Basic patterns – Teledyne LeCroy SierraFC M164 User Manual User Manual
Page 159
SierraFC M164 Protocol Analyzer User Manual
159
Easy Mode (Pre‐Defined Setups)
Teledyne LeCroy
External Trigger Pattern
You can trigger on an external trigger. To set up the trigger, click the External Trigger
pattern. In order to select an External Trigger refer to the
.
Figure 2.122: Add External Trigger Pattern Dialog
Basic Patterns
Connect/Disconnect
See
.
Symbol
Double‐click Symbol in the Pattern window to open the Add Symbol Pattern dialog.
Figure 2.123: Add Symbol Pattern Dialog
Choose a symbol type by checking either the K Symbol or D Symbol option.
If you choose the K symbol, click the down arrow in the Symbol dropdown list, choose a
symbol on which to trigger, and click OK.
The D Symbol choice does not have a down arrow.
Count is the expected number of occurrences on each link. Default is 1.
Ordered Set
See
“Ordered Set” on page 49
for more information.