Vanguard EZCT-2000C Plus - Manual (Page 100)

EZCT-2000C USER’S MANUAL REV 1
96
4.3 Setting the Clock
To set the EZCT-2000C’s internal clock:
a. Start from the “START-UP” menu:
Press the
[2]
key (SETUP).
b. The following screen will be displayed:
Press the [6] key (NEXT PAGE).
c. The following screen will be displayed:
Press the [1] key (SET TIME).
d. The following screen will be displayed:
Enter the month, date, time, hours, minutes, and seconds (in 24-hour format) using the
keypad. When the last digit is entered, the clock will be set and you will be returned to
the “START-UP” menu.
ENTER
mm-dd-yy hh:mm:ss
_
1. SET TIME
2. SET LANGUAGE
3. BURIED CT IN DELTA
4. KNEE POINT MARKER
5. PRINT RAW DATA
6. DISABLE H-VTG CHECK
1. RECORD ID
2. PRINT RECORD
3. RECORD DIRECTORY
4. SAVE/RESTORE RECORD
5. ERASE RECORD
6. NEXT PAGE
1. RUN TEST 05/02/13
2. SETUP 14:14:25
3. TEST PLANS
4. DIAGNOSTICS
5. CURRENT SOURCE