Vanguard EZCT-2000C Plus - Manual (Page 39)

REV 1 EZCT-2000C USER’S MANUAL
35
Then, the following screen will be displayed:
Print the
[1]
key (YES) if you would like to print the test results. The test results will be
printed on the thermal printer. A typical burden test results report is shown in Figure 13.
Press the
[2]
key (NO) if you do not want to print the test results.
h. The following screen will be displayed:
Press the [1] key (YES) to keep the test results.
i. The following screen will be displayed:
Press the [1] key (YES) to save the test record. The following screen will be displayed
momentarily:
SAVE THIS RECORD?
1. YES
2. NO
KEEP THIS TEST?
1. YES
2. NO
print test results?
1. YES
2. NO
CABLES ENERGIZED!
BURDEN TEST RESULTS
2.983 VA
COS
ϕ
= 0.92