Vanguard EZCT-2000C Plus - Manual (Page 49)

REV 1 EZCT-2000C USER’S MANUAL
45
Press the [1] key (INTERNAL STORAGE).
The following screen will then be displayed:
Continue with the steps below.
1. ENTER RECORD NUMBER
If you know the record number that you would like to restore, press the [1] key.
The following screen will be displayed:
Type the record number using the keypad and then press the [ENTER] key. The
following screen will be displayed:
If you do not want to print the test record, press the [2] key (NO). The test
record will be restored to the working memory, and you will be returned to the
“START-UP” menu.
If you would like to print the test record, press the [1] key (YES). Continue to
step d.
RECORD RESTORED!
PRINT RECORD?
1. YES
2. NO
RESTORE RECORD
NUMBER:
RESTORE RECORD
1. enter record number
2. scroll to select
1. INTERNAL STORAGE
2. THUMB DRIVE