Vanguard EZCT-2000C Plus User Manual
Page 52
EZCT-2000C USER’S MANUAL
REV 1
48
3.4.2. Restoring and Printing a Test Record From a USB Flash Drive
You can restore a test record from a USB Flash drive to the EZCT-2000C’s working memory
using the steps below:
a. Make sure the USB Flash drive containing the test record(s) is inserted in the EZCT-
2000C’s USB Flash drive port (“USB MEM” port). Then start from the “START-UP” menu:
Press the
[2]
key (SETUP).
b. The following screen will be displayed:
Press the
[4]
key (SAVE/RESTORE RECORD).
c. The following screen will be displayed:
Press the
[1]
key (RESTORE RECORD).
d. The following screen will be displayed:
Press the
[2]
key (THUMB DRIVE).
1.
INTERNAL STORAGE
2.
THUMB DRIVE
1.
RESTORE RECORD
2.
COPY TO THUMB DRIVE
1.
RECORD ID
2.
PRINT RECORD
3.
RECORD DIRECTORY
4.
SAVE/RESTORE RECORD
5.
ERASE RECORD
6.
NEXT PAGE
1.
RUN TEST 04/17/13
2.
SETUP 07:39:39
3.
TEST PLANS
4.
DIAGNOSTICS
5.
CURRENT SOURCE