Vanguard EZCT-2000C Plus - Manual (Page 68)

EZCT-2000C USER’S MANUAL REV 1
64
d. The following screen will be displayed:
1. ERASE SINGLE REC.
Press the
[1]
key (ERASE SINGLE REC.) if you would like to erase a single record.
The following screen will be displayed:
Type the record number to be erased and press the [ENTER] key.
NOTES
• You can press the [STOP] key to cancel the process.
• If you do not know the record number, you can first print a test
record directory using the instructions in section 3.4.5.
The following screen will be displayed:
Press any key to continue. The following screen will be displayed:
You can continue to erase additional records or press the
[STOP]
key to exit to
the “START-UP” menu.
ERASE RECORD
1. ERASE SINGLE REC.
2. ERASE ALL RECORDS
"STOP" TO EXIT
THUMB DRIVE REC_001
ERASED!
ERASE THUMB DRIVE
REC_
ERASE RECORD
1. ERASE SINGLE REC.
2. ERASE ALL RECORDS
"STOP" TO EXIT