Vanguard EZCT-2000C Plus - Manual (Page 89)

REV 1 EZCT-2000C USER’S MANUAL
85
When the test has finished, the following screen will be displayed:
Press the [1] key (YES) to save the record.
The following screen will be displayed momentarily:
Then the following confirmation screen will be displayed:
Press any key to return to the “START-UP” menu.
3. UNLOAD TEST PLAN
Press the [3] key to unload the test plan and run a test without a test plan. This
will unload the test plan from the working memory and bring up the standard
“RUN TEST” menu. Please see section 3.3.2, step b.
RECORD NUMBER 2
has been saved!
SAVING RECORD...
PLEASE WAIT...
SAVE THIS RECORD?
1. YES
2. NO