Vanguard EZCT-2000C Plus - Manual (Page 24)

EZCT-2000C USER’S MANUAL REV 1
20
h. The following screen will be displayed:
Type the serial number using the keypad and then press the
[ENTER]
key.
i. The following screen will be displayed:
Enter any relevant comments using the keypad and then press the [ENTER] key.
j. The following screen will be displayed:
Type the operator’s name using the keypad and then press the [ENTER] key. All
header information will be saved, and you will be returned to the “START-UP” menu.
OPERATOR:
TA
↑↓
TO POSITION
"enter" to accept
COMMENTS:
no comment
↑↓
TO POSITION
"enter" to accept
SERIAL NUMBER:
26002
↑↓
TO POSITION
"enter" to accept