Vanguard EZCT-2000C Plus - Manual (Page 23)

REV 1 EZCT-2000C USER’S MANUAL
19
d. The following screen will be displayed:
Type the station name using the keypad and then press the
[ENTER]
key.
e. The following screen will be displayed:
Type the circuit information using the keypad and then press the [ENTER] key.
f. The following screen will be displayed:
Type the manufacturer name using the keypad and then press the [ENTER] key.
g. The following screen will be displayed:
Type the model information using the keypad and then press the [ENTER] key.
MODEL:
EZCT2000C
↑↓
TO POSITION
"enter" to accept
MANUFACTURER:
ABB
↑↓
TO POSITION
"enter" to accept
CIRCUIT:
CIRCUIT 1
↑↓
TO POSITION
"enter" to accept
STATION:
LAB
↑↓
TO POSITION
"enter" to accept