Vanguard EZCT-2000C Plus - Manual (Page 78)

EZCT-2000C USER’S MANUAL REV 1
74
3.5.5. Erasing Test Plans From the Flash EEPROM
To erase one or all test plans from the EZCT-2000C’s Flash EEPROM:
a. Start from the “START-UP” menu:
Press the
[3]
key (TEST PLANS).
b. The following screen will be displayed:
Press the [6] key (ERASE TEST PLAN).
c. The following screen will be displayed:
NOTE
The above screen will be displayed only if a USB Flash drive is NOT connected
to the EZCT-2000C’s USB Flash drive port. If a USB Flash drive is connected,
the following screen will be displayed:
Press the [1] key (ERASE INTERNAL PLAN). The following screen will be
displayed:
1. Erase internal plan
2. erase thmb drv plan
ERASE TEST PLAN
1. ERASE SINGLE PLAN
2. ERASE ALL PLANS
1. load test plan
2. unload test plan
3. plan directory
4. extract test plan
5. print test plan
6. erase test plan
7. copy to thumb drive
1. RUN TEST 04/19/13
2. SETUP 11:11:11
3. TEST PLANS
4. DIAGNOSTICS
5. CURRENT SOURCE