Vanguard EZCT-2000C Plus - Manual (Page 38)

EZCT-2000C USER’S MANUAL REV 1
34
f. The following screen will be displayed:
Press the [START] key to begin the test.
g. The following screen will be displayed:
NOTE
The “HIGH VOLTAGE PRESENT” light will be illuminated to indicate that high
voltage is present.
The following screen will be displayed momentarily:
Then the following screen will be displayed:
When the test is completed, the test results will be displayed temporarily:
CABLES ENERGIZED!
I=0.0018 AMPS
V= 1.3 VAC
CABLES ENERGIZED!
PLEASE WAIT...
CABLES ENERGIZED!
I=0.0016 AMPS
V= 1.2 VAC
test 1 parameters:
1 amp burden test
connect x1-x2 cables
to burden now.
"Start" to begin