Avi hood installation – XLT XD-9005A User Manual
Technical Support US: 888-443-2751
Technical Support INTL: 316-943-2751
AVI HOOD INSTALLATION
Lifting Jack Setup
Check for smooth operation. The cable should not be pinched & should pass
smoothly over the pulley on top of the pole assembly.
Inspect cable prior to each use.
If cable is frayed or shows signs of excessive wear & tear, DO NOT USE until
cable is replaced.
At a minimum replace the cable annually with wire rope that meets or exceeds
the jack manufacturer’s specifications.
Do not exceed the stated capacity of the jack.