Avi hood cleaning – XLT XD-9005A User Manual

Page 81

Advertising
background image

81

Technical Support US: 888-443-2751

Technical Support INTL: 316-943-2751

AVI HOOD CLEANING

Shroud Panels can weigh up to 60 lbs [27 kg]. Use caution when lifting.

CAUTION

Schedule provided as a guide only. Frequency of cleaning may vary as needed.

DO NOT spray liquid cleaning agents in the slots & holes of the following loca-
tions:

Hood electrical box (located on back of upper portion)

VFD Controller

Back of control box

Underneath control box

CAUTION

Your AVI hood is constructed of stainless and aluminized steel. Check application restric-

tions on product label prior to usage. Observe recommended precautionary and safety measures as
dictated by the product manufacturer.

Do not use abrasive or caustic cleaners. Abrasive pads will scratch stainless steel surfaces.

Areas with heavy buildup should be sprayed and allowed to soak for up to 5 minutes prior to wip-
ing clean. Always wipe with the “grain” of the surface to maintain appearance.

Oven must be cool and the electric cord unplugged before any cleaning is done.

WARNING

Cleaning

Wipe down Front, Sides, & Top

Clean Light Globes

Empty & Clean Grease Trays

Clean Grease Filters

Clean Duct and Exhaust Fan

Inspection

Check Indicator Lamp

Check Grease Trays

Check Grease Filters

Adjust

No Adjustments Necessary

Lubricate

No Lubrication Required

Replace

Light Bulbs

Hood Cleaning & Maintenance Schedule

Daily

Weekly Monthly

Semi-

Annual

As Required

Refer to the Hood Installation Section for disassembly and reassembly.

Advertising