ZOLL AutoPulse Rev A - Manual (Page 15)

P/N. 12457-001 Rev. 2 Page 3-1
Power System User Guide
3 AutoPulse NiMH Battery
The AutoPulse NiMH Battery (see Figure 3-1) is a proprietary, rechargeable, removable Nickel-Metal
Hydride battery that is a power source for the AutoPulse Platform.
The AutoPulse NiMH Battery is mechanically keyed to the AutoPulse Platform and the AutoPulse
Multi-Chemistry Battery Charger to facilitate correct installation. One end of the AutoPulse NiMH
Battery contains connections for power and communications. A Battery Status Check button illuminates
the AutoPulse NiMH Battery’s status light-emitting diodes (LEDs).
Batteries experience a loss of capacity when left standing. ZOLL recommends AutoPulse NiMH
Batteries be changed daily or after each use. Charged AutoPulse NiMH Batteries left for any extended
period in the AutoPulse or as a spare may not have sufficient capacity to operate effectively.
Caution: Remove the protective plastic cap from the Battery before attempting to charge the Battery.
Caution: Only use ZOLL Batteries specifically designed for use with the AutoPulse System. The use
of other batteries may cause permanent damage to the AutoPulse Platform and will void the
warranty.
Warning: Always charge a stored Battery before placing the Battery in active operation. Battery may
self-discharge when not in use. Failure to charge a Battery before use may cause device
power failure. In no case should any Battery be used if it has not been charged within 2
days.