ZOLL AutoPulse Rev A - Manual (Page 19)

P/N. 12457-001 Rev. 2 Page 4-3
Power System User Guide
Note: Do not slam a Battery into a Charger because doing so may cause damage to the Battery’s
Connector.
Note: Both Batteries are mechanically keyed so that they can only be inserted in one orientation. Do
not force a Battery into a charging bay. If resistance is met, check for appropriate orientation,
and check to ensure that there are no obstructions to battery insertion.
Figure 4-2 Sliding the Battery into a Multi-Chemistry Battery Charger Charging Bay
2. The Multi-Chemistry Battery Charger automatically detects the presence of a Battery within 5
seconds.
3. The Multi-Chemistry Battery Charger’s status will be indicated on the control panel (see Figure 4-
3 and Table 4-1).
Figure 4-3 Multi-Chemistry Charger Control Panel