ZOLL M Series CCT Defibrillator Rev D - Manual (Page 15)

ZOLL M Series Invasive Blood Pressure 9
Changing the trace labels
Each Pressure channel has a unique label in the IBP display area (see the "Reading the Display"
on page 6 for further details). The generic labels are “P1” for Pressure channel 1 and “P2” for
Pressure channel 2. These labels appear in the IBP display areas, summary reports, and strip
charts. For ease of use, you can set these labels to indicate the type of pressure measurement in
use.
You can change either of these labels to one of the following:
• ART (arterial blood pressure)
• PA (pulmonary arterial pressure)
• CVP (central venous pressure)
• ICP (intracranial pressure)
To change the trace label:
1. Press the Label softkey. If the Label softkey is not displayed, see "Displaying the IBP Menu"
on page 3.
The Label menu displays (see Fig. 10):
Figure 10: Label Menu
2. Press the Select softkey to select the label you want to change.
3. Press the Enter softkey.
The Label Options menu displays (see Fig. 11):
Figure 11: Label Options Menu
4. Press the Select softkey to select the label you want to display.
5. Press the Enter softkey.
M Series unit displays the selected label. If desired, repeat steps 1 - 5 to change the other label.