ZOLL M Series CCT Defibrillator Rev D - Manual (Page 16)

10 ZOLL M Series Invasive Blood Pressure
Changing the displayed range
Each IBP trace has a range that consists of upper and lower limits. By changing the displayed range,
you can change the size of the IBP waveform.
To change the displayed range:
1. Press the Range softkey. If the Range softkey is not displayed, see "Displaying the IBP Menu"
on page 3.
The Range menu displays (see Fig. 12):
Figure 12: Range Menu
2. Press the Select softkey to select the pressure channel whose range you want to change.
3. Press the Enter softkey.
The Range Options menu displays (see Fig. 13):
Figure 13: Range Options Menu
4. Press the Select softkey to select the range you want to display.
5. Press the Enter softkey.
M Series unit displays the trace with the selected range. If desired, repeat steps 1 - 5 to change
the other pressure channel range.