ZOLL Thermogard XP IVTM System Operation Manual - Manual (Page 40)

Operation
9
User Interface
The primary controls for the System are mounted in the display head of the
system. The next sections describe:
 The controls available to the user
 The System display screen
 The System menu system available to the user.
System Controls
1. Display Screen
2. Alarm Indicator LED.
3. Mute Button
4. Power On Indicator LED.
5. Target Temp Button.
6. Standby / Run Button.
7. Rate Deg / HR Button.
8. Press for Menu / Enter
Knob
Figure 4-3. Controls and Display.
The use of each of the controls is described in the table below.
Table 4-2. System Controls
Power Indicator Glows green when the display has power.
System Alarm Indicator Flashes red during alarm states
Standby/Run button Toggles between RUN and STANDBY
Target Temperature button Press this to change the target temperature
Rate Deg/Hr button Press this to change the rate and/or treatment mode.
“Press & Rotate” knob This knob operates the menus on the System display.
Rotate the knob to scroll between selections. Press and
release the knob to select.
600479-001 Rev 2 40/147