IEI Integration PCISA-945GSE v1.10 - Manual (Page 37)

PCISA-945GSE CPU Card
Page 19
3.2 Internal Peripheral Connectors
Internal peripheral connectors are found on the motherboard and are only accessible
when the motherboard is outside of the chassis. This section has complete descriptions of
all the internal, peripheral connectors on the PCISA-945GSE.
3.2.1 ATX Power Control Connector
CN Label: ATXCTL1
CN Type: 3-pin wafer (1x3)
CN Location: See Figure 3-3
CN Pinouts: See Table 3-3
The ATX power supply enable connector enables the PCISA-945GSE to be connected to
an ATX power supply. In default mode, the PCISA-945GSE can only us an AT power
supply. To enable an ATX power supply the AT Power Select jumper must also be
configured. Please refer to Chapter 3 for more details.
Figure 3-3: ATX Power Supply Enable Connector Location
PIN NO. DESCRIPTION
1 GND
2 PS-ON