IEI Integration PCISA-945GSE v1.10 - Manual (Page 98)

PCISA-945GSE CPU Card
Page 80
Î
Enhanced D EFAULT Configures the on-board ATA/IDE controller to be in
Enhanced mode. In this mode, IDE channels and
SATA channels are separated. This mode supports
up to 6 storage devices. Some legacy OS do not
support this mode.
ƒ Legacy IDE Channels [PATA Pri, SATA Sec]
Î
SATA Only Only the SATA drives are enabled.
Î
SATA Pri, PATA Sec D EFAULT The IDE drives are enabled on the Primary
IDE channel. The SATA drives are enabled on
the Secondary IDE channel.
Î
PATA Only The IDE drives are enabled on the primary
and secondary IDE channels. SATA drives
are disabled.
ƒ IDE Master and IDE Slave
When entering setup, BIOS auto detects the presence of IDE devices. BIOS displays the
status of the auto detected IDE devices. The following IDE devices are detected and are
shown in the IDE Configuration menu:
ƒ Primary IDE Master
ƒ Primary IDE Slave
ƒ Secondary IDE Master
ƒ Secondary IDE Slave
The IDE Configuration menu (
7
BIOS Menu 4) allows changes to the configurations for the
IDE devices installed in the system. If an IDE device is detected, and one of the above
listed four BIOS configuration options are selected, the IDE configuration options shown in
Section 87
7
5.3.2.1 appear.