IEI Integration PCISA-945GSE v1.10 - Manual (Page 83)

PCISA-945GSE CPU Card
Page 65
Step 7: Insert the cable connector. Press the clip on the connector at the end of the
SATA cable and insert the cable connector into the onboard SATA drive
connector. See
7
Figure 4-11.
Figure 4-11: SATA Drive Cable Connection
Step 8: Connect the cable to the SATA disk. Connect the connector on the other end
of the cable to the connector at the back of the SATA drive. See
7
Figure 4-12.
Step 9: Connect the SATA power cable. Connect the SATA power connector to the
back of the SATA drive. See
7
Figure 4-12. Step 9: