IEI Integration PCISA-945GSE v1.10 - Manual (Page 40)

PCISA-945GSE CPU Card
Page 22
3.2.4 Battery Connector
CN Label: BT1
CN Type: 2-pin wafer (1x2)
CN Location: See Figure 3-6
CN Pinouts: See Table 3-6
The battery connector is for the system battery. The battery retains the system date and
time while the computer is turned off.
Figure 3-6: Battery Connector Location
PIN NO. DESCRIPTION
1 Battery+
2 Battery-
Table 3-6: Battery Connector Pinouts
3.2.5 BIOS Programming Connector
CN Label: JSPI1
CN Type: 8-pin header (2x4)
CN Location: See Figure 3-7
CN Pinouts: See Table 3-7
The 8-pin SPI Flash connector is used for the BIOS.