Watlow Series D8 - Manual (Page 32)

Chapter 2: Installation Series D8 User’s Guide
14 Watlow Anafaze Doc. 0600-3120-2000
41 mm (1.6 inches) for a right-angle DeviceNet connector and
SCSI connector. Refer to Figure 2.2.
Figure 2.2 Module Dimensions and Clearance
Figure 2.3 Wiring Clearances
We recommend you mount the controller in a panel not more
than 0.2 inch (5 mm) thick.
1. Choose a panel location free from excessive heat (more
than 50°C), dust, and unauthorized handling. (Make sure
there is adequate clearance for the mounting hardware,
188 mm (7.4 in)
25 mm
(1.0 in) 41 mm to 54 mm
(1.6 in to 2.1 in) for cables and clearance
3.63 ± 0.020 inches
(92.2 ± 0.5 mm)
1.80 ± 0.020 inch
(45.7 ± 0.5 mm)
Maximum Panel Thickness
0.2 inch (5 mm)