Setting parameters via devicenet, Non-numeric settings, Setting parameters via devicenet 58 – Watlow Series D8 User Manual
Page 76: Non-numeric settings 58, Figure 3.11—explicit read in ladder 58
Chapter 3: Communicating by DeviceNet
Series D8 User’s Guide
58
Watlow Anafaze
Doc. 0600-3120-2000
Figure 3.11 Explicit Read in Ladder
When I:1/15 comes on, indicating there is a response available
to a previously sent message, the controller's loop 1 Propor-
tional Band value is copied to N14:103. Again, if N14:100
comes back as an echo of N14:90 (transaction completed suc-
cessfully) the MVM instruction deletes the transaction from
the response queue.
Setting Parameters via DeviceNet
All values stored in the D8 are bits, integers or strings. Some
integers represent settings that appear as text in the controller
interface. Some integers represent numeric settings.
This section describes how to interpret values found in the De-
viceNet objects.
Non-Numeric Settings
With the exceptions of the Loop Name and Units parameters,
when the controller interface displays the setting as a word, a