Yokogawa 415 Steam and Gas - Manual (Page 55)

SELECT
(GAS PARAMETERS)
GAS EQUATION
(STEAM, IDEAL GAS, GENERAL GAS, NATURAL GAS)
STEAM TYPE
(SATURATED, SUPERHEATED)
SAT STEAM INPUT
(PRESSURE,
TEMPERATURE)
BASE TEMP
±XXX.XX
CRITICAL TEMP
±XXX.XX
BASE
TEMPERATURE
±XXX.XX
DEFAULT DISPLAY
(MASS, ENERGY)
BASE PRESSURE
XXXXX
CRITICAL
PRESSURE
XXXXX
BASE PRESSURE
XXXXX
BASE TEMP 1
+XXX.XX
SPECIFIC GRAVITY
X.XXX
BASE TEMP
±XXX.XX
SPECIFIC GRAVITY
X.XXX
BASE PRESSURE 1
XXXXX
DEFAULT DISPLAY
(CORRECTED
VOLUME, MASS)
BASE PRESSURE
XXXXX
MOLE % N2
XX.XX
SELECT
(EXIT)
SELECT
(EXIT)
SPECIFIC
GRAVITY
X.XXX
MOLE % CO2
XX.XX
DEFAULT DISPLAY
(CORRECTED
VOLUME, MASS)
DEFAULT DISPLAY
(CORRECTED
VOLUME, MASS)
SELECT
(EXIT)
SELECT
(EXIT)
1
Only required for differential pressure flowmeters. With volumetric flowmeters, there is no need to enter
base temperature & pressure and these values can be left at the default values.
Temperatures are entered as °C or °F rather than °K or °R.
Calibration 53