Yokogawa Standalone MW100 User Manual
Page 106
-
106/131 -
IM MW100-S16E-1
Ed01
2.6.1. Log and summary output (FL)
This command is used to output log or summary.
To implement DNP communication
functions, new parameter named DNP3_M, DNP3_C, DNP3_S, DNP3_T and
DNP3_MC, DNP3_MS, DNP3_CC, DNP3_CS are added.
- Setting to output log
FL p1, p2, p3 (in case p1 is 0)
p1 : Output type (0)
0 : Output log
p2 : Data kind (ERROR, RECORD, ALARM, MESSAGE,
COM, FTPC, MAIL, DHCP, SNTP, FTPS,
HTTP, MODBUS_M, MODBUS_C,
MODBUS_S, MODBUS_T,
MATH, CMD, RECSTATUS,
DNP3_M, DNP3_C, DNP3_S, DNP3_T
)
ERROR :
Operation error log
RECORD
:
Recording
log
ALARM
: Alarm
summary
MESSAGE
:
Message
summary
COM
:
Communication
log
FTP_C
:
FTP
client
log
SMTP
:
SMTP
client
log
DHCP
:
DHCP
client
log
SNTP
:
SNTP
client
log
FTP_S
:
FTP
server
log
HTTP
:
HTTP
server
log
MODBUS_M : Modbus master log
MODBUS_C :
Modbus client log