Yokogawa Standalone MW100 - Manual (Page 16)

-
16/131 -
IM MW100-S16E-1
Ed01
2.2.3. Configuration of destination of DNP master/client
To use DNP master/client functions of MW100, user should configure the destination
address and behavior of the communication. Items for configuring the destination and
behavior of DNP master/client functions are shown in Table 8. About the detail of the
configuration, refer the explanation of the pages showed in the table.
Table 8. Items for configuring destination and behavior of DNP master/client
Item Page
Configuration of destination address P. 17
Configuration of polling period and action
P. 20
Configuration of unsolicited message
P. 23