Yokogawa Standalone MW100 - Manual (Page 108)

-
108/131 -
IM MW100-S16E-1
Ed01
- Setting to output summary
FL p1, p2, p3, p4 (in case p1 is 1)
p1 : Output type (1)
1 : Output summary
p2 : Data kind (MODBUS_MC, MODBUS_MS,
MODBUS_CC, MODBUS_CS,
DNP3_MC, DNP3_MS,
DNP3_CC, DNP3_CS )
MODBUS_MC : Modbus master command status
MODBUS_MS : Modbus master connection status
MODBUS_CC : Modbus client command status
MODBUS_CS : Modbus client connection status
BALANCE : Results of initial balancing of strain inputs
DNP3_MC : DNP master command status
DNP3_MS : DNP master connection status
DNP3_CC : DNP client command status
DNP3_CS : DNP client connection status
p3 : First data number (refer Table 45)
p4 : Last data number (refer Table 45)
Table 45. Data kind and data number
Data kind
(p2)
Data number
(p3, p4)
MODBUS_MC 1 to 100
MODBUS_MS 1 to 247
MODBUS_CC 1 to 100
MODBUS_CS 1 to 10
BALANCE 1 to 60
DNP3_MC 1 to 100
DNP3_MS 1 to 10
DNP3_CC 1 to 100
DNP3_CS 1 to 10