Yokogawa Standalone MW100 - Manual (Page 7)

-
7/131 -
IM MW100-S16E-1
Ed01
Basic specification of serial and ethernet port in MW100, which is used as a datalink
of the DNP communication, is shown in Table 1 and Table 2.
Table 1. Specification of serial port
Item Specification
Datalink RS-232-C, RS-422-A / 485
Baud rate
1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
Parity bits
None, Odd, Even
Stop bits
1, 2 bit
Byte size
8 bit (fixed)
Handshake Off : Off (fixed)
Table 2. Specification of ethernet port
Item Specification
Datalink Ethernet 10 Base-T, 100 Base-TX
Service port 20000 (configurable)
TCP keep alive Not used
TCP application timeout Not used