Yokogawa Standalone MW100 - Manual (Page 68)

-
68/131 -
IM MW100-S16E-1
Ed01
Table 32. Parameters for configuring DNP protocol stack behavior (2/2)
Kind Configuration
Datalink
Confirmation
Behavior of datalink layer confirmation
- selectable from ”Never”, “Always”, “Sometimes”
- Never : Never require confirmation
- Always : Always require confirmation
- Sometimes : Require confirmation only when
multi-frame is sent
Datalink
Timeout
Limit of waiting time for datalink confirmation
- configurable within 1 to 60
- When confirmation is not received over the limit,
DNP slave/server will retry to send the frame
Datalink
Retry Count
Maximum retry count
- configurable within 0 to 5
- When confirmation is not received over the count,
DNP slave/server will discard the frame
Datalink
Keep Alive Time Period to send Request Link Status frame to check link status
- configurable within 0 to 3600 [s]
- In case of 0, DNP slave/server won't check link status