Nexo GEO D - Manual (Page 23)

GEO D RIGGING PROCEDURE Page 23/97
5.2.2 Rigging Accessories
Rigging Accessories are:
• Bumper
(GEOD-BUMPER)
• Short Extension Bar (GEOD-EXBAR1)
• Compression Wheel for Short Extension Bar EXBAR1 (GEOD-ORP)
• Two legs Bridle (GEO-BRIDLE)
• Long Extension Bar (GEOD-EXBAR2)
• Bottom Extension Bar (GEOD-EXBAR3)
• Front Extension Bar (GEOD-EXBAR4)
• Bottom Bumper (GEOD-BTBUMPER)
• Chain Lever Hoists (LEVA0750 or LEVA1500)
• Chain
Bag (CHBAG)
• Push-Pins
(BLGEOD)
• Shoulder Bolts and Nuts (GEOD-BNFIX)
• Bumper Stands stacking kit (GEOD-BUDP)
GEOD-EXBAR4
GEOD-BUMPER GEOD-EXBAR1 GEOD-ORP GEOD-EXBAR2 GEOD-EXBAR3
GEO BRIDLE GEOD-BTUMPER GEOD-LEVA750 & LEVA150 CHBAG BLGEOD -GEOD-BNFIX
GEOD-BUDP
IMPORTANT
All GEOD / GEO SUB Rigging Components are specifically rated in agreement with
structural computations.
Never use other accessories – including push-pins - when assembling GEO D / GEO SUB
clusters than the ones provided by NEXO: NEXO will decline responsability over the
entire GEOD / GEO SUB rigging system if any component is purchased from different
supplier.
6 x
x 4