Nexo GEO D - Manual (Page 8)

Page 8/97 I NTRODUCTION
1 I
NTRODUCTION
Thank you for selecting a NEXO GEO D Series Tangent Array System. This manual is intended to
provide you with necessary and useful information about your GEO System, which includes the
following products:
• D10 is a 10° Tangent Array Module. It
comprises 2x8” (20cm) 8 Ohms LF Drivers
(side firing), 1x12” (30cm) Neodynium 16
ohms LF/MF driver (front) and 1x3” voice
coil, 1.4” Throat 16 Ohm HF Driver loaded
by a 5° Hyperboloid Reflective
Wavesource™.
• Geo Sub is a Cardioid Dipole Sub-bass. It
comprises 1x18” (46cm) Long Excursion
Neodymium 8 Ohm Driver and 2x 12”
(30cm) Neodynium 16 ohms LF drivers,
controlled by DSP advanced proprietary
algorithm, producing a 120° x 120° cardioid
pattern. Can be used in conjunction with
GeoD in flown clusters or in ground-stacked
configuration.
• NX242 Digital TDcontroller and NXtension-ES4 provides comprehensive control of GEO D
loudspeakers in multiple configurations. It allows Ethersound TM digital audio networking, as well
as remote control for all units in the network.
For a complete description of this unit, please refer to the NX242 User Manual. The NX242 DSP
algorithms and parameters are fixed in software and updated regularly: please consult the NEXO
web site (www.NEXO.fr or www.NEXO-sa.com) for the latest software releases.
GeoD Passive mode
Crossover 80Hz