Brocade FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide - Manual (Page 209)

FIGURE 38 Sample network topology - Using STP in an MCT configuration
Router-1 configuration
!
lag "1" static id 1
ports ethernet 1/1 ethernet 1/3
primary-port 1/1
deploy
lag "1" static id 2
ports ethernet 1/5 ethernet 1/7
primary-port 1/5
deploy
lag "1" static id 3
ports ethernet 2/1 ethernet 2/2
primary-port 2/1
deploy
!
vlan 2 name session-vlan by port
tagged ethe 2/1 to 2/2
router-interface ve 2
!
vlan 3 name keep-alive-vlan by port
tagged ethe 1/12
router-interface ve 3
!
vlan 1905 name MAC-scaling-vlan by port
tagged ethe 1/1 to 1/3 ethe 1/5 to 1/7 ethe 1/15 to
1/16 ethe 2/1 to 2/2 ethe 2/4 ethe 3/1 ethe 3/3
!
hostname R1
!
link-keepalive ethe 1/1 to 1/3 ethe 1/5 to 1/7
hitless-failover enable
!
interface ve 2
ip address 21.1.1.1 255.255.255.0
!
interface ve 3
Multi-Chassis Trunking
FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide 209
53-1003086-04