Brocade FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide - Manual (Page 449)

show packet-inerror-detect
Displays details related to the monitoring for inError packets for configured ports.
Syntax show packet-inerror-detect
Modes Privileged EXEC mode
Global configuration mode
Interface configuration mode
Usage Guidelines You can use this show command to view details related to the monitoring for inError packets for
configured ports.
Command Output The show packet-inerror-detect command displays the following information:
Output field Description
Sampling interval Displays the configured sampling interval.
Port Identifies a port.
Packet inError count The number of inError packets received in the sampling interval for the
specific port.
State Displays the status for the specific port.
Examples The following example shows the output for this command.
Brocade# show packet-inerror-detect
Sampling interval 5 secs
Port Packet inError count State
1/1/1 30 Operational
1/1/37 10 ERR-DISABLED
2/1/1 100 Operational
History
Release version Command history
07.3.00g This command was introduced.
show packet-inerror-detect
FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide 449
53-1003086-04