Brocade FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide - Manual (Page 409)

FIGURE 90 Example 802.1ad configuration
Configuring 802.1ad tag profiles
NOTE
802.1ad tag profiles are not supported on FastIron X Series devices.
The 802.1ad tagging feature supports a tag-profile command that allows you to add a tag profile with a
value of 0 to 0xffff in addition to the default tag-type 0x8100. This enhancement also allows you to add a
tag profile for a single port, or to direct a group of ports to a globally-configured tag profile.
Configuration notes for 802.1ad tagging
• One global tag profile with a number between 0 and 0xffff can be configured on stackable devices.
• On individual ports, if tag-profile is enabled, it points to the global tag profile.
• Tag-profile can also be enabled for provisional ports.
Configuring 802.1ad tag profiles
FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide 409
53-1003086-04