Brocade FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide - Manual (Page 451)

snmp-server enable traps mac-notification
Enables the MAC-notification trap whenever a MAC address event is generated on a device or an
interface.
The no form of this command disables the SNMP trap for MAC-notification events.
Syntax snmp-server enable traps mac-notification
no snmp-server enable traps mac-notification
Command Default MAC-notification traps are disabled on the device.
Modes Global configuration
Interface configuration
Examples The following example enables SNMP traps on the device for MAC-notification globally:
device(config)# snmp-server enable traps mac-notification
The following example disables SNMP traps on the device for MAC-notification globally:
device(config)# no snmp-server enable traps mac-notification
History
Release version Command history
08.0.10 This command was introduced.
snmp-server enable traps mac-notification
FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide 451
53-1003086-04