Brocade FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide - Manual (Page 34)

1000 May
15
01:13:20
10
0000.0000.0051 7/1 7/2
1002 May
15
01:13:20
10
0000.0000.0050 7/1 7/2
1012 May
15
01:13:20
10
0000.0000.004f 7/1 7/2
1018 May
15
01:13:20
10
0000.0000.004e 7/1 7/2
1012 May
15
01:13:20
10
(output truncated)
The following table defines the fields in the output of the show notification mac-movement interval-
history command.
Field definitions for the show notification mac-movement interval-history command TABLE 3
Field Description
Interval-History Mac Movement
Notification is Specifies whether the interval-history data collection is enabled.
Configured Interval The interval over which the MAC address movement statistics were
collected.
Number of macs that moved in the
interval The number of MAC addresses that moved during the configured interval,
regardless of how many times each address moved.
Total number of moves in the interval The total number of MAC address moves over the configured interval.
MAC-Address The MAC address that has moved to a different port.
from-Port The port from which the MAC address moved.
to-Port The port to which the MAC address moved.
Interval Move-Count The number of times the MAC address has moved within the interval.
Last Move-Time The time of the last MAC move occurred. It uses the system up time If
there is no time server configured.
Vlan-id The VLAN for the port where the MAC address movement was detected.
Basic Layer 2 Features
34 FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide
53-1003086-04