Work Sharp WS3000 Woodworking Tool Sharpener User Guide - Manual (Page 16)

16 www.worksharptools.com 16 www.worksharptools.com
Problem
Sharpening Port jumps down under pressure
Solutions
• Sharpening Port engagement teeth are not properly aligned. See
Angle Selection View Port on right side of tool near Fence Knob to
ensure the proper angle selected is fully engaged.
• You are applying too much downward force during sharpening. Do
not use excessive force.
• If condition persists, please call a customer service agent for direc-
tion.
Problem
Tool is not sharp
Solutions
• Back of tool is not flat at the cutting edge.
• Bevel has not been sharpened all the way to the cutting edge.
• Burr has been created at cutting edge. Follow repeated ‘plunge and
pull’ method for best results.
• Marks from previous (coarser) grit have not yet been removed. Fol-
low grit selection criteria.
Problem
Tool will not stay sharp
Solutions
• Tool was sharpened to too small of an angle for application. Try a
larger (stronger) bevel angle.
• The burr at the cutting edge was not removed. Follow repeated
‘plunge and pull’ method for best results.
• Try micro beveling your tool for a stronger, more durable cutting
edge.
• Tools made of softer steels do not hold an edge as long and may need
to be sharpened more often.
For Technical Support
1-800-418-1439 (toll-free USA and Canada only)
1-541-552-1301
Please call 6:00 AM–3:30 PM Pacific Time.
Warranty
2-year warranty on all WORK SHARP ® components;
excludes Glass Wheel, crepe, and abrasives
Your WORK SHARP ® is warranted to be free of defects due to
workmanship or design for 2 years from the purchase date. If
your WORK SHARP
® fails to operate, or if any operating prob-
lem occurs, contact WORK SHARP ® Technical Service at:
1-800-418-1439
(toll-free USA and Canada only)
1-541-552-1301
Please call 6:00 AM–3:30 PM Pacific Time.
Do not return this product to the store where you purchased
it. Do not attempt any service or repairs other than those sug-
gested by a WORK SHARP
® Technical Service Representative
(TSR). During the period of warranty, WORK SHARP ® will, at
our discretion, repair or replace this product free of charge and
will refund Standard Ground UPS postage or shipping charges
providing that the following conditions are met:
1. A copy of the proof of purchase is provided.
2. The product has been operated for the purpose intended
as described in the operating instructions and has not
been abused or mishandled in any way.
3. The product has not been dismantled and no service or re-
pairs have been attempted other than those suggested
by a WORK SHARP
® TSR.
4. The Return Goods Authorization number (RGA #) (as-
signed by the WORK SHARP ® TSR) is written on the
shipping label.
Please make certain to package items in such a way as to elim-
inate further damage during shipping. Ship via a traceable car-
rier and properly insure the package. No CODs are accepted.
Unapproved shipping charges are nonrefundable.
Complete and mail back the Warranty Registration & Custom-
er Survey in the WORK SHARP
® box, or register online at:
www.worksharptools.com
Please Fill in the Following for Your Records.
WORK SHARP ® Serial Number:
__________ __________ __________
Date of Purchase:
_____ / _____ / _______
Purchased from:
___________________________________