Work Sharp WS3000 Woodworking Tool Sharpener User Guide - Manual (Page 6)

6 www.worksharptools.com 6 www.worksharptools.com
1
Getting to Know
Your Tool
WORK SHARP
®
The Wood Tool Sharpener & Hone
2" Sharpening Port
and Heat Sink
T-Slots for mounting
accessories
Top Knob
6' Power Cord
Motor 1 ⁄
5
horsepower induction
Wheel Speed 580 RPM (gear reduced)
Wheel Material 150mm tempered float glass
Tool Construction Cast-aluminum top; sheet-metal housing; impact and vibration-resistant, tool-grade plastic base
Cooling System Heat sink with routed airflow
Power Connection Industrial grade switch with safety lockout; grounded 6' power cord
Abrasives 150mm and 2" premium, durable PSA (Pressure Sensitive Adhesive) ceramic oxide and aluminum oxide
abrasives (Also accepts standard 6" abrasives. Trimming is required to fit 150mm tempered glass wheel.)
Honing 150mm Micro-Mesh™ 3600 cushioned abrasive (6 µ micron)
(Leather disk and honing compound accessory available.)
Tool Specs
Hub
Angle Indicator
Wheel Shroud
T-Slots for mounting
accessories
Locking
Power Switch
Bevel Angle
Selection Lever
Skew Cam
Adjustment Lever
Fence Adjustment
Knob
Wheel Direction
Indicator
Sharpening
Port Fence
Bench Mounting
Tabs
Bench Mounting
Tabs
Tempered Glass
Wheel
Underside Port
Tool Rest
OFF-LOCKED OUT OFF ON
To lock out power switch, remove the lock-out key. The machine
can now be turned off, but not on.
To turn the machine on, insert lock-out key in the front of the
power switch. Machine may now be turned on or off.