GW Instek GDS-1000A-U Series Programming Manual - Manual (Page 15)

COMMAND DETAILS
15
C
OMMAND DETAILS
The Command details chapter shows the detailed
syntax, equivalent panel operation, and example
for each command. For the list of all commands,
see page9.
System command .................................... 16
Acquisition Command.............................. 19
Autoset Command ................................... 24
Channel Command .................................. 25
Math Command ....................................... 31
Cursor Command ..................................... 35
Display Command .................................... 39
Measure command .................................. 42
Go No-Go Commands .............................. 57
Data Log Commands ............................... 67
Save/Recall Command ............................. 70
Time (Horizontal) command ................... 75
Trigger command ..................................... 78