GW Instek GDS-1000A-U Series Programming Manual - Manual (Page 51)

COMMAND DETAILS
51
Example :measure:source 1
:measure:period? Selects Channel 1, and
then measures the
period.
:MEASure:PWIDth
Query
Description Returns the first positive pulse width.
Same as: Measure key → F1~F5 → F3 (+Width)
Syntax < Long > < Short >
:measure:period? :meas:per?
Returns <NR3>
Note Before using this command, select the
measurement channel. See the example below.
Example :measure:source 1
:measure:pwidth? Selects Channel 1, and
then measures the
positive pulse width.
:MEASure:RISe
Query
Description Returns the first pulse rising edge timing.
Same as: Measure key → F1~F5 → F3 (RiseTime)
Syntax < Long > < Short >
:measure:rise? :meas:ris?
Returns <NR3>
Note Before using this command, select the
measurement channel. See the example below.
Example :measure:source 1
:measure:rise? Selects Channel 1, and
then measures the
rising edge timing.