GW Instek GDS-1000A-U Series Programming Manual - Manual (Page 39)

COMMAND DETAILS
39
Display Command
:DISPlay:ACCumulate ..................................................39
:DISPlay:CONTrast ......................................................39
:DISPlay:GRATicule .....................................................40
:DISPlay:WAVeform .....................................................40
:REFResh ......................................................................41
:DISPlay:ACCumulate
Set
Query
Description Turns the display accumulate mode on/off or
returns its status.
Same as: Display key → F2
Syntax < Long > < Short >
:display:accumulate <Boolean>
:display:accumulate? :disp:acc <Boolean>
:disp:acc?
Parameter <NR1> Display accumulation
0 off
1 on
Example :display:accumulate 1 Turns on the
accumulation
:DISPlay:CONTrast
Set
Query
Description Sets or returns the display contrast level.
Same as: Display key → F4
Syntax < Long > < Short >
:display:contrast <NR1>
:display:contrast? :disp:cont <NR1>
:disp:cont?