GW Instek GDS-1000A-U Series Programming Manual - Manual (Page 54)

GDS-1000A-U Programming Manual
54
Example :measure:source 1
:measure:vaverage? Selects Channel 1, and
then measures the
average Voltage.
:MEASure:VHI
Query
Description Returns the global high voltage.
Same as: Measure key → F1~F5 → F3 (Vhi)
Syntax < Long > < Short >
:measure:vhi? :meas:vhi?
Returns <NR3>
Note Before using this command, select the
measurement channel. See the example below.
Example :measure:source 1
:measure:vhi? Selects Channel 1, and
then measures the
global high Voltage.
:MEASure:VLO
Query
Description Returns the global low voltage.
Same as: Measure key → F1~F5 → F3 (Vlo)
Syntax < Long > < Short >
:measure:vlo? :meas:vlo?
Returns <NR3>
Note Before using this command, select the
measurement channel. See the example below.
Example :measure:source 1
:measure:vlo? Selects Channel 1, and
then measures the
global low Voltage.